Troubleshooting Guide for Oxygen Concentrator | Oxytec Smart

Back
Oxytec Smart

If you are not able to resolve the issue with the help of the troubleshooting guide, we are here to service you.

The troubleshooting guide has a list of common problems and their solutions which will help you
to fix the device yourself.

How to correct problem if you gets less bubbles of Oxygen in Humidifier Bottle ?

How to Clean or change Cabinet filter?

  1. Remove the Cabinet filter cover by pushing the lock down and pulling out the cover.
  2. Cleaned with air blower to remove dust. (Do not use water to clean filters)
    (to buy new you may visit www.shopmedtechlife.com )

How to change HEPA filter?

  1. To replace filter remove the compressor inlet cap by pushing the lock sideways and pulling out the cover.
  2. Remove by pulling out of machine by holding with fingers. (to buy new you may visit www.shopmedtechlife.com)
  3. Insert new filter in place by pushing in position with hand.

How to attach nasal canula and Humidifier bottle properly?

  1. Connect the Oxygen Outlet tubing to the humidifier bottle threaded adapter
  2. And the other end of the oxygen outlet tubing to the oxygen outlet in the machine.
  3. Connect the nasal cannula inlet to the outlet of the humidifier bottle outlet.
  4. Connect the nasal cannula inlet to the humidifier bottle.

Need further assistance?

If you are not able to resolve the issue with the help of the troubleshooting guide, we are here to service you.